Fadal VMC-4525 Vertical Machining Center


Fadal VMC-4525 Vertical Machining Center

Stock Number: 10976

Fadal VMC-4525

Age: 2008

Condition: Approx 1,400 Hours


Fadal's Performance Series Machine - The VMC-4525 is a robust machine with heavy cast iron construction and high torque spindle, which reduces cycle time for heavy cutting operations including steel. Wider castings increase rigidity and coupled with the box ways, Cool Power and large 40 mm diameter ball screws, enable the 4525 to deliver tolerances of 0.00016. High performance features of the 4525 include an automatic two-speed spindle drive system, parallel processing and optional chip wash-down and auger system. The 4525 VMC features heavy cast iron Box Ways, which provide large surface area contact for maximum vibration damping and rigidity. A leading-edge AC Vector Drive system with a high torque 22.5 HP spindle motor delivers 270 ft/lbs. of peak torque and maintains consistent torque over the full RPM range from 10-10,000 RPM with closed loop feedback. The automatic two-speed spindle drive system features a mechanical, two-speed gearless system that delivers higher performance at a wider range of RPM, which results in reduced noise, heat, vibration and power loss associated with gear boxes.

      
Click to view larger photo


SpecificationDescription
Table Size:53.5" x 25"
Table Load Capacity:4250 lbs
Travels:45" x 25" x 24"
Spindle Nose to Table Top:4.0" - 28.0"
Rapid Traverse (X & Y / Z):900 ipm / 700 ipm
Cutting Feedrate:0.01 to 250 ipm
Spindle Speed:10 - 10000 rpm
Spindle Taper:CAT-40
Spindle Motor:22.5 hp
ATC Positions:24
ATC Type:Twin Arm, Side Mount
Maximum Tool Diameter:4" / 6" with adj pocket empty
Maximum Tool Length:15"
Maximum Tool Weight:15 lbs
Machine Size:130" x 102" x 125" Tall
Machine Weight:13,600 lbs
Pwer Requirement:220v, 3 Phase, 65 KVA
  

Equipped With:
* Fanuc 18iMB5 CNC Control * PCMCIA drive * 24 Position Side Mount ATC * Renishaw Tool and Part Probing * 300 PSI Coolant Through Spindle * Chip Conveyor * Cool Power on Spindle and Ball Screws X,Y,Z * 24" Z Axis Travel * Full Enclosure * Manuals


HomeIndexContactView Cart


Fadal VMC-4525 Vertical Machining Center
Edge Machine Tools, Inc
1632 Todd Farm Drive
Elgin, IL 60123
224-856-5636
224-535-9583
sales@edgemachinetools.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com