Charmilles Robofil 440SL Wire EDM

Charmilles Robofil 440SL Wire EDM

Charmilles Robofil 440SL

Age: 2006

Condition: Approx 10,000 hours

Stock Number: 11088

Charmilles released the Robofil 440SL in 2005, a machine replacing the standard Robofil 440 wire EDM. Among the most noticeable of the changes to the machine design is: * New lower head. Coupled with symmetrical XY and UV tables, this allows the machine to handle maximum taper angles of up to 30 degrees to the full part height. A new 3D part alignment system allows easy setup for heavy and tall parts. * A new filter system, featuring four filters, rather than 2. * CT-Millennium CNC, a Window based operating system. Dynamic Screen Function (DSF) aids in setting up and taking references of a job to be executed, using animated 3D drawings to illustrate the job. * The system also allows a machine to be integrated into a local area network (LAN) and performs remote job notification through SMS. * Constantly measures water levels in the work tank, making adjustments as needed to allow for unattended machining of parts with differing heights. With a fill rate of 132 gallons per minute, the machine has maximum fill and drain times of just 30 seconds. * ThermoCut automatic wire threading system. The system stretches and cuts the wire under the effect of heat and then quickly and accurately threads it. Compatible with any type of wire, whether brass or coated, ThermoCut requires minimum maintenance and threads reliably up to 24 in. tall parts. To best minimize maintenance costs and ensure long-term accuracy * Handles parts measuring 47.24 in. wide by 27.56 in. deep by 15.75 in. tall, with a maximum weight of 3,306 lbs.

Table Size:35.43" x 23.62"
Floor to Table:35.43"
Maximum Workpiece Dimensions:47.24" x 27.55" x 15.7"
Maximum Workipiece Weight:3307 lbs
Machining Stroke ( X x Y x Z ):21.65" x 13.78" x 15.7"
U/V Travel:21.65 x 13.77"
Wire Diameters:.004" - .012"
Wire Spool Size:17.7 lbs.
Taper Capacity:0 to 30 Degrees
Dielectric Tank Capacity:317 gal
Machine Weight:7275 lbs
Machine Size:101" x 110" x 101"

Equipped With:
- Charmilles Millennium CNC Control - 30 degree Taper at any Z Height - Submerged Cutting over full Z stroke - Automatic Wire Threading - Integrated Collision Protection & Glass Scale Feedback for XYUVz - Advantage Chiller - Transformer - Manuals

HomeIndexContactView Cart

Charmilles Robofil 440SL Wire EDM
Edge Machine Tools, Inc
731 N Raddant Rd
Batavia, IL 60510

Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers