Fanuc Alpha 0iC Wire EDM
EDM, Wire EDM
• Fanuc series 180is-WB 64 bit CNC control
• Heidenhain linear glass scales – X and Y Axis only
• Fanuc serial/digital AC servo motors
• Five controlable axes (X, Y, U, V, Z)
• 30 degree taper cutting capability
• Absolute position detection system
• Independent column mounted U and V axis slides
• Automatic wire feed system (18 sec. spark to spark)
• Anti-Crash protection (X, Y, U, V, Z)
• 12.1” Color ICD
| # of Axis | 5 |
| Table Load Capacity | 1100 lb |
| X - Axis Travel | 12.6 in |
| Y - Axis Travel | 8.7 in |
| Z - Axis Travel | 7 in |
| U/V - Axis Travel | -2.364 in |
| Taper Capacity | 30 deg |
| Auto Threading (Yes/No) | Yes |
| Wire Diameter - Min | 0.004 in |
| Wire Diameter - Max | 0.012 in |
| Dielectric Tank Capacity | 127 gal |
| Submerged (Yes/No) | Yes No |
| Chiller included | no |
| Power Requirement | 220 va |
| Shipping Brackets | Yes |
| Control | CNC |
| Dimensions | 78" x 78" x 77" |
| Weight | 4,000 lbs |
• Fanuc series 180is-WB 64 bit CNC control
• Heidenhain linear glass scales – X and Y Axis only
• Fanuc serial/digital AC servo motors
• Five controlable axes (X, Y, U, V, Z)
• 30 degree taper cutting capability
• Absolute position detection system
• Independent column mounted U and V axis slides
• Automatic wire feed system (18 sec. spark to spark)
• Anti-Crash protection (X, Y, U, V, Z)
• 12.1” Color ICD
• Programmable “Z” axis
• AI function – automatic setting of cutting conditions
• Handy controller (Hand held pendant)
• Quick conversational programming
• Automatic water level control in work tank
• Operator guidance screens for operation, alarms, maintenance and parts
• RS232C input/output port for file transferring
• Ethernet port
• PCMCIA slot
• Coordinate system rotation
• Work coordinate system (G54-G59)
• Scaling
• Retrace
• Programmable flushing
